Home › Beko error codes › Dryer
Beko Dryer Error Codes
Every Beko Dryer code in the database, with its meaning. Open a code for its causes, the checks to run in order, and how to clear it.
| Code | Meaning | Fix level |
|---|---|---|
E01also: E1 | Door opened while running | DIY-friendly |
E02also: E2 | Water tank full | DIY-friendly |
E03also: E3 | Drum empty — no load detected | Not a fault |
E04also: E4 | Start attempted with the door open | DIY-friendly |
E05also: E5 | Maximum drying time exceeded | DIY checks first |
E06also: E6 | Door temperature sensor (NTC) open circuit | Call a professional |
E07also: E7 | Door temperature sensor (NTC) short circuit | Call a professional |
E08also: E8 | Door temperature sensor (NTC) overheating | DIY checks first |
E09also: E9 | Compressor temperature sensor (NTC) open circuit | Call a professional |
E10 | Compressor temperature sensor (NTC) short circuit | Call a professional |
E11 | Compressor temperature sensor (NTC) overheating | DIY checks first |
E12 | Drive belt broken | Call a professional |
E13 | Filter blocked | DIY-friendly |
E14 | Temperature rising too quickly | DIY checks first |
E16 | Supply voltage too low (below 165 V) | Not a fault |
E17 | Supply voltage too high (above 265 V) | Not a fault |
E18 | BLDC motor communication error | Call a professional |
E19 | BLDC motor system paused | DIY checks first |
E20 | BLDC motor speed out of tolerance | Call a professional |
E21 | BLDC motor minimum speed not reached | Call a professional |
E22 | BLDC drive re-energised unexpectedly | DIY checks first |
E23 | BLDC drive abnormal voltage | Call a professional |
E24 | BLDC motor overheating | DIY checks first |
E25 | BLDC motor locked rotor | Call a professional |
E26 | BLDC motor overspeed | Call a professional |
E27 | BLDC motor overcurrent | Call a professional |
Other Beko appliances
More appliance types are being added. Codes vary by model and region.