Home › Beko error codes › Washing Machine
Beko Washing Machine Error Codes
Every Beko Washing Machine code in the database, with its meaning. Open a code for its causes, the checks to run in order, and how to clear it.
| Code | Meaning | Fix level |
|---|---|---|
E01also: E1 | Door lock fault — the machine cannot confirm the door is closed and locked | DIY checks first |
E02also: E2 | Heating fault — the water is not reaching the set temperature | DIY checks first |
E03also: E3 | Drain fault — the machine cannot empty the water in the allowed time | DIY-friendly |
E04also: E4 | Fill fault — the machine is not filling with water in the allowed time | DIY-friendly |
E05also: E5 | Pressure switch fault — the water level sensor is reading incorrectly | DIY checks first |
E06also: E6 | NTC thermistor fault — the temperature sensor is not reading correctly | DIY checks first |
E07also: E7 | Motor circuit fault — the motor or its control triac has failed | Call a professional |
E08also: E8 | Motor tachometer fault — the control board cannot read the drum speed | DIY checks first |
E13also: E13 | Water leak detected — the anti-flood system has found water in the base | DIY checks first |
H1 | NTC thermistor open or short circuit (service test code) | Call a professional |
H11 | Motor or tachogenerator open circuit (service test code) | Call a professional |
H2 | Heater open circuit (service test code) | Call a professional |
H3 | Heater stuck on — heater triac or relay shorted (service test code) | Call a professional |
H4 | Inlet valve triac short circuit (service test code) | Call a professional |
H5 | Drain pump open circuit (service test code) | DIY checks first |
H6 | Motor triac short circuit (service test code) | Call a professional |
H7 | Pressure sensor failure (service test code) | DIY checks first |
H8 | Tachometer fault — motor speed sensor (service test code) | Call a professional |
Other Beko appliances
More appliance types are being added. Codes vary by model and region.