Bosch Oven Error Code F41
The motorised latch must lock the door before self-clean (and some modes) can run. F41 says the control commanded the lock but never saw it engage within the allowed time. Door alignment and obstructions are worth ruling out before the latch motor is blamed.
Common causes
- Door not fully closed or something holding it slightly open
- Latch hook or motor jammed by debris or a bent door
- Latch motor failed
- Latch switch or its wiring defective
What to check, in order
- Cancel the cycle, open and firmly re-close the door, and check nothing (a rack, foil, a pan handle) is holding it off the frame.
- Look at the latch hook in the door frame: it should move freely; clear any debris and check the door is not sagging on its hinges.
- Reset the oven at the breaker for a minute and try starting self-clean again; listen for the latch motor running.
- If the motor is silent, strains or the code returns immediately, the latch assembly or its switches need testing and likely replacement — a technician job.
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code F41, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Parts that may be involved
Door latch assemblyLatch motorLatch switch
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about F41
What does F41 mean on a Bosch oven?
F41 means: Oven door latch will not lock (upper or single oven). The motorised latch must lock the door before self-clean (and some modes) can run. F41 says the control commanded the lock but never saw it engage within the allowed time. Door alignment and obstructions are worth ruling out before the latch motor is blamed.
Can I fix Bosch F41 myself?
Start yourself: the checks on this page cover the causes you can reach without opening the machine up. If they point to a faulty part, testing or replacing it is usually a technician job.
How do I clear Bosch F41?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- Bosch Home (US) owner support: dishwasher error codes
- Coolblue advice: Bosch and Siemens washing machine errors
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.