Bosch Oven Error Code E011
E011 is most often not a fault at all: the control sees one key pressed for 10 seconds straight and pauses heating for safety. Something leaning on the panel is the usual cause, and the oven resumes as soon as the key is released. Only a code that appears on an untouched panel indicates a bad key.
Common causes
- Something resting against the touch panel
- A leaning utensil, cookbook or the oven's own door pressing a key
- Grease or moisture film holding a key 'on'
- A failing key in the touchpad assembly
What to check, in order
- Take everything off and away from the control panel and wipe the touch surface clean and dry.
- Wait: heating resumes on its own once no key has been pressed for a few seconds, and the code clears.
- If the code appears with the panel clean, dry and untouched, one key in the pad is electrically stuck and the touch assembly is failing.
- A touch panel that triggers itself needs replacement — a technician job on built-in models.
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code E011, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Parts that may be involved
Touch panel assemblyUser interface board
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about E011
What does E011 mean on a Bosch oven?
E011 means: One key pressed continuously (key held for 10 seconds or more). E011 is most often not a fault at all: the control sees one key pressed for 10 seconds straight and pauses heating for safety. Something leaning on the panel is the usual cause, and the oven resumes as soon as the key is released. Only a code that appears on an untouched panel indicates a bad key.
Can I fix Bosch E011 myself?
Usually, yes. Code E011 is rated DIY-friendly: the checks on this page cover the common causes and use basic household items only. If the code returns after the checks and a test cycle, book a technician.
How do I clear Bosch E011?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- Bosch Home (US) owner support: dishwasher error codes
- Coolblue advice: Bosch and Siemens washing machine errors
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.