Home › LG error codes › Dryer
LG Dryer Error Codes
Every LG Dryer code in the database, with its meaning. Open a code for its causes, the checks to run in order, and how to clear it.
| Code | Meaning | Fix level |
|---|---|---|
Addalso: Add Water | Steam feeder is empty: add water before running a steam cycle | DIY-friendly |
CL | Child lock (control lock) is on: the control panel is locked, not a fault | Not a fault |
E13 | Drain problem on hybrid condensing dryers: the drain hose is blocked or the sump water is frozen | DIY checks first |
FOalso: F0 | Lint filter is out: the dryer cannot detect the filter in its housing | DIY-friendly |
HSalso: Hs | Humidity (moisture) sensor error | DIY checks first |
PF | Power failure: the cycle was interrupted by a loss of power | Not a fault |
PS | Improper voltage in the power cord, often reversed cord wires at the terminal block | DIY checks first |
d75also: D75 | Flow Sense warning: the exhaust duct is about 75% blocked | DIY-friendly |
d80also: D80 | Flow Sense warning: the exhaust duct is about 80% blocked | DIY-friendly |
d90also: D90 | Flow Sense warning: the exhaust duct is about 90% blocked | DIY checks first |
d95also: D95 | Flow Sense warning: the exhaust duct is about 95% blocked | DIY checks first |
dEalso: DE | Door error: the dryer does not detect the door as fully closed | DIY checks first |
gASalso: GAS | Gas supply is turned off or interrupted (gas models only) | DIY-friendly |
nPalso: NP | No current detected at the heater: a home wiring or power supply problem (electric models) | DIY checks first |
tE1also: TE1 | Thermistor (temperature sensor) error | DIY checks first |
tE2also: TE2 | Thermistor (temperature sensor) error, often linked to steam cycles or cold conditions | DIY checks first |
tE3also: TE3 | Thermistor (temperature sensor) error | DIY checks first |
tE4also: TE4 | Steam generator thermistor failure (steam models; normally only shown in diagnostic test mode) | Call a professional |
Other LG appliances
More appliance types are being added. Codes vary by model and region.