LG Dryer Error Code E13
On hybrid condensing models, the dryer cannot drain away its condensed water. Check the drain hose for kinks or clogs first; if the code returns with a clear, unfrozen hose, the drain pump is the likely fault.
Common causes
- Drain hose kinked or crushed
- Drain hose clogged
- Water in the sump frozen in cold conditions
- An extended, non-standard drain hose adding too much resistance
- Failed drain pump
What to check, in order
- Straighten the drain hose and clear any kink, crush or clog along its run
- Use only the standard LG drain hose rather than an extended one
- If the dryer is installed somewhere cold, allow any frozen water in the sump to thaw before restarting
- Press Start/Pause to restart; if E13 returns with the hose clear and thawed, book service to check the drain pump
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code E13, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Parts that may be involved
Drain hoseDrain pump
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about E13
What does E13 mean on a LG dryer?
E13 means: Drain problem on hybrid condensing dryers: the drain hose is blocked or the sump water is frozen. On hybrid condensing models, the dryer cannot drain away its condensed water. Check the drain hose for kinks or clogs first; if the code returns with a clear, unfrozen hose, the drain pump is the likely fault.
Can I fix LG E13 myself?
Start yourself: the checks on this page cover the causes you can reach without opening the machine up. If they point to a faulty part, testing or replacing it is usually a technician job.
How do I clear LG E13?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- LG Help Library: washing machine error codes
- PartsTown Resource Center: LG washing machine troubleshooting codes
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.