Beko Refrigerator Error Code E9
The ice maker mechanism itself has failed its movement check — the control does not see the ejector switch change position while the unit cycles, so it shuts the ice maker down.
Also shown as: E09
Applies to: Beko American-style side-by-side and multi-door fridge freezers with a display, ASD (Cosmos) series and similar models
Common causes
- Jammed ice cubes in the mould or ejector
- Failed ice maker motor or switch
- Frozen or interrupted water supply to the ice maker
- Damaged wiring to the ice maker
What to check, in order
- Remove the ice bucket and clear any jammed or fused-together cubes.
- Check the water supply tap to the fridge is open and the water filter is not overdue for replacement.
- Reset the appliance and let it run a full cycle; listen for the ice maker turning.
- If the mechanism still does not cycle, the ice maker unit needs testing — a technician job.
Clear the code and test
- Fix what the checks above found first — a vent cleared, the doors sealing again, the coils cleaned. Clearing the code without fixing the cause only brings it back.
- Plug the fridge back in and make sure both doors close fully.
- Leave the doors closed and give the fridge time: check after about an hour whether the code has gone and the temperature is dropping again.
- If the code is still showing after a few hours, or the temperature is not recovering, write the code down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code E9, your model number (on a label inside, on the side wall) and the checks you already ran. It shortens the visit.
Parts that may be involved
Ice maker unitWater inlet valve
Parts are model-specific. Find your model number first — usually on a label inside, on the side wall — and match the part to that number before ordering.
Questions people ask about E9
What does E9 mean on a Beko refrigerator?
E9 means: Ice maker failure. The ice maker mechanism itself has failed its movement check — the control does not see the ejector switch change position while the unit cycles, so it shuts the ice maker down.
Can I fix Beko E9 myself?
Start yourself: the checks on this page cover the causes you can reach without opening the machine up. If they point to a faulty part, testing or replacing it is usually a technician job.
How do I clear Beko E9?
Fix what the checks above found first — a vent cleared, the doors sealing again, the coils cleaned. Clearing the code without fixing the cause only brings it back. Plug the fridge back in and make sure both doors close fully. Leave the doors closed and give the fridge time: check after about an hour whether the code has gone and the temperature is dropping again.
Sources checked
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.