Beko Refrigerator Error Code E13
The freezer fan is running at the wrong speed or not at all, so cold air is not circulated; temperatures rise and the compressor works harder.
Applies to: Beko American-style side-by-side and multi-door fridge freezers with a display, ASD (Cosmos) series and similar models; on four-door models E13 can flag the ice-chamber sensor instead of the freezer fan, so check the manual for your model
Common causes
- Fan blocked by ice build-up
- Fan obstructed by packaging or food
- Failed freezer fan motor
- Damaged fan wiring
What to check, in order
- Check nothing inside the freezer is pushed against the fan cover.
- Listen for the fan with the freezer door switch pressed in — silence or scraping suggests ice or failure.
- A full defrost (24 hours off, doors open) clears an iced-up fan; if the code returns after defrosting, the fan motor needs replacing — a technician job.
Clear the code and test
- Fix what the checks above found first — a vent cleared, the doors sealing again, the coils cleaned. Clearing the code without fixing the cause only brings it back.
- Plug the fridge back in and make sure both doors close fully.
- Leave the doors closed and give the fridge time: check after about an hour whether the code has gone and the temperature is dropping again.
- If the code is still showing after a few hours, or the temperature is not recovering, write the code down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code E13, your model number (on a label inside, on the side wall) and the checks you already ran. It shortens the visit.
Parts that may be involved
Freezer fan motorControl module
Parts are model-specific. Find your model number first — usually on a label inside, on the side wall — and match the part to that number before ordering.
Questions people ask about E13
What does E13 mean on a Beko refrigerator?
E13 means: Freezer fan error. The freezer fan is running at the wrong speed or not at all, so cold air is not circulated; temperatures rise and the compressor works harder.
Can I fix Beko E13 myself?
Start yourself: the checks on this page cover the causes you can reach without opening the machine up. If they point to a faulty part, testing or replacing it is usually a technician job.
How do I clear Beko E13?
Fix what the checks above found first — a vent cleared, the doors sealing again, the coils cleaned. Clearing the code without fixing the cause only brings it back. Plug the fridge back in and make sure both doors close fully. Leave the doors closed and give the fridge time: check after about an hour whether the code has gone and the temperature is dropping again.
Sources checked
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.