Home › Samsung error codes › Error code SUd

Samsung Washing Machine Error Code SUd

DIY-friendlyReviewed November 2026Checked against manufacturer documentation
What this code means
SUd: Too many suds detected

This is not a breakdown. The washer has detected excess foam and pauses to let it break down before continuing. It is caused by detergent, not by the machine.

Also shown as: Sd, 5d, 5UD

Fix level
DIY-friendly
Most people can run the checks on this page with basic household items.
Time to run the checks
About 15–30 minutes
For the 3 checks on this page — not a full repair.
You may need
No special tools
The checks below use basic household items only.
Parts that may be involved
None usually
Parts are model-specific; see the note below before ordering.

Common causes

  1. Too much detergent for the load
  2. Non-HE detergent used in a high-efficiency machine
  3. Detergent buildup from repeated overdosing

What to check, in order

Safety first. Switch the machine off and unplug it before cleaning filters or moving hoses. Expect water to come out when you open a pump filter; keep a tray and towel ready. If you are not comfortable with any step, stop and call a technician.
  1. Wait: the machine usually clears the foam and resumes on its own.
  2. Use less detergent, and use HE detergent in front-load and HE top-load models.
  3. Run an empty hot wash or tub-clean cycle to clear detergent residue.

Clear the code and test

  1. Fix what the checks above found first — a filter cleaned, a hose straightened, taps opened. Clearing the code without fixing the cause only brings it back.
  2. Close the door, plug the machine back in and restore the water supply.
  3. Run a short rinse and spin, or the shortest wash programme, and watch the stage where the code appeared before (filling, washing, draining or spinning).
  4. If the cycle finishes with no code, the fault is cleared. If the code returns at the same stage, write down the code and that stage before calling a technician — it speeds up the diagnosis.

When to call a professional

Most cases are solved by the checks above. Book a technician if any of these apply:

  • The code comes back after you have run the checks and a test cycle.
  • You smell burning, see sparks or scorch marks, or the breaker trips.
  • Water is leaking and you cannot stop it at the tap.
  • The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.

When you call, give the brand, the code SUd, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.

Questions people ask about SUd

What does SUd mean on a Samsung washing machine?

SUd means: Too many suds detected. This is not a breakdown. The washer has detected excess foam and pauses to let it break down before continuing. It is caused by detergent, not by the machine.

Can I fix Samsung SUd myself?

Usually, yes. Code SUd is rated DIY-friendly: the checks on this page cover the common causes and use basic household items only. If the code returns after the checks and a test cycle, book a technician.

How do I clear Samsung SUd?

Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.

Sources checked

The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.

Other Samsung washing machine codes