Samsung Refrigerator Error Code 76C
76C, or a blinking Autofill indicator, means moisture was detected in the Autofill compartment. Drying the compartment out clears it in most cases; it only needs more attention if water keeps collecting there.
Common causes
- Water or moisture has collected in the Autofill compartment
- Water spilled while refilling the AutoFill pitcher
- The pitcher lid or seal is not closed properly and is leaking
What to check, in order
- Open the Autofill compartment and dry the compartment and the pitcher area completely, which is Samsung's stated fix.
- Check the AutoFill pitcher is seated correctly with its lid closed, and wipe up any standing water.
- Watch whether the code or the blinking Autofill indicator returns; if water keeps appearing, check the pitcher and its seal for leaks.
- If it recurs with no visible spill, book service to check for a water leak.
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code 76C, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Parts that may be involved
AutoFill pitcher
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about 76C
What does 76C mean on a Samsung refrigerator?
76C means: Water detected in the Autofill compartment. 76C, or a blinking Autofill indicator, means moisture was detected in the Autofill compartment. Drying the compartment out clears it in most cases; it only needs more attention if water keeps collecting there.
Can I fix Samsung 76C myself?
Usually, yes. Code 76C is rated DIY-friendly: the checks on this page cover the common causes and use basic household items only. If the code returns after the checks and a test cycle, book a technician.
How do I clear Samsung 76C?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- Samsung support: washing machine information codes
- Samsung support: dishwasher information codes
- Samsung support (US): dishwasher troubleshooting
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.