Samsung Oven Error Code C-F2
The touch panel and the main controls have lost communication, the current-generation counterpart of the older -tE- code. Panel moisture explains a one-off; a returning code is connectors or boards.
Common causes
- A loose touch panel connector
- Moisture on the panel confusing the touch controller
- The touch control has failed
- The main or sub control board has failed
What to check, in order
- Dry the control panel and restart the oven.
- If the code returns, switch off all power for at least 30 seconds and reconnect.
- With the power off, reseat the touch panel's connector.
- If the code persists, the touch control or a board needs replacing.
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
This code usually points to a faulty part, wiring or the control board on a Samsung oven. Run the checks above to rule out the simple causes, then book a technician — and book one straight away if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code C-F2, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Repair or replace?
This fault is in professional territory: the fix usually means a major part or board-level work, and the labour adds up. If your machine is already well into its service life, get the repair quote first, then compare it with the price of a current equivalent model before you decide. Paying a large share of a new machine's price to repair an old one is rarely the better deal; replacing a machine over one cheap fault is wasteful too.
Parts that may be involved
Touch control panelMain control board (PCB)
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about C-F2
What does C-F2 mean on a Samsung oven?
C-F2 means: Communication problem between the touch control and the main/sub control. The touch panel and the main controls have lost communication, the current-generation counterpart of the older -tE- code. Panel moisture explains a one-off; a returning code is connectors or boards.
Can I fix Samsung C-F2 myself?
Only the preliminary checks. Code C-F2 usually means a part, wiring or the control board has failed, which is a technician job. Run the checks to rule out simple causes before you book.
How do I clear Samsung C-F2?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- Samsung support: washing machine information codes
- Samsung support: dishwasher information codes
- Samsung support (US): dishwasher troubleshooting
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.