Samsung Dryer Error Code bE2
The control thinks one of the buttons is being pressed continuously, so the dryer refuses to run. Freeing the stuck button by pressing each one in turn clears it in most cases; a code that keeps coming back means the panel itself is failing.
Also shown as: bE, bC2, 6E, 6E2, 6C2
Common causes
- A button is physically stuck under the panel facing
- Something resting or leaning against the control panel
- Moisture or residue on a touch-control panel
- Control panel (user interface) starting to fail
What to check, in order
- Power the dryer off, then press and release every button on the panel one by one, working back and forth across all the edges of each button, to free any that are stuck.
- Wipe the panel dry and make sure nothing is leaning against the controls.
- Power the dryer back on and start a cycle.
- If the code returns, or a button feels damaged, the user interface control needs replacing.
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code bE2, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Parts that may be involved
User interface controlControl panel
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about bE2
What does bE2 mean on a Samsung dryer?
bE2 means: Button error: a control panel button is stuck or held down. The control thinks one of the buttons is being pressed continuously, so the dryer refuses to run. Freeing the stuck button by pressing each one in turn clears it in most cases; a code that keeps coming back means the panel itself is failing.
Can I fix Samsung bE2 myself?
Usually, yes. Code bE2 is rated DIY-friendly: the checks on this page cover the common causes and use basic household items only. If the code returns after the checks and a test cycle, book a technician.
How do I clear Samsung bE2?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- Samsung support: washing machine information codes
- Samsung support: dishwasher information codes
- Samsung support (US): dishwasher troubleshooting
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.