LG Washing Machine Error Code E3
On LG top-load models, E3 is assigned to the drain motor: the part that opens the drain path is not moving as commanded.
Common causes
- Drain motor failure
- Linkage or connector problem
- Control board fault
What to check, in order
- Restart the machine once after a full power-off.
- There is no user adjustment for the drain motor; a returning E3 needs a technician.
Clear the code and test
- Fix what the checks above found first — a filter cleaned, a hose straightened, taps opened. Clearing the code without fixing the cause only brings it back.
- Close the door, plug the machine back in and restore the water supply.
- Run a short rinse and spin, or the shortest wash programme, and watch the stage where the code appeared before (filling, washing, draining or spinning).
- If the cycle finishes with no code, the fault is cleared. If the code returns at the same stage, write down the code and that stage before calling a technician — it speeds up the diagnosis.
When to call a professional
This code usually points to a faulty part, wiring or the control board on a LG washing machine. Run the checks above to rule out the simple causes, then book a technician — and book one straight away if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code E3, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Repair or replace?
This fault is in professional territory: the fix usually means a major part or board-level work, and the labour adds up. If your machine is already well into its service life, get the repair quote first, then compare it with the price of a current equivalent model before you decide. Paying a large share of a new machine's price to repair an old one is rarely the better deal; replacing a machine over one cheap fault is wasteful too.
Parts that may be involved
Drain motor
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about E3
What does E3 mean on a LG washing machine?
E3 means: Drain motor error (top-load models). On LG top-load models, E3 is assigned to the drain motor: the part that opens the drain path is not moving as commanded.
Can I fix LG E3 myself?
Only the preliminary checks. Code E3 usually means a part, wiring or the control board has failed, which is a technician job. Run the checks to rule out simple causes before you book.
How do I clear LG E3?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- LG Help Library: washing machine error codes
- PartsTown Resource Center: LG washing machine troubleshooting codes
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.